Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Repair and care<br />
Rental Ski Boot | 69<br />
Replacement of buckles and<br />
buckle teeth<br />
If buckles and/or buckle teeth require<br />
replacement, proceed as follows:<br />
Should the buckles be mounted with<br />
rivets, they must be removed with a<br />
6 mm drill. If the buckles are mounted<br />
with screws, simply unscrew them<br />
with a screwdriver.<br />
1. Secure the new buckles (or buckle<br />
teeth) with a clamp on the shell.<br />
2.Screw the buckles on with the<br />
enclosed screws and nuts.<br />
3.Make sure the screws are properly<br />
tightened.<br />
Replacement of Velcro strap<br />
Replacement of the Velcro strap is<br />
very easy.<br />
1. Take inner boot out from the shell.<br />
2.If the Velcro strap is mounted with<br />
a rivet, use a 4 mm drill to remove<br />
it from the inside of the shell.<br />
Take out the rivet and remove the<br />
old Velcro strap.<br />
3.Secure the new Velcro strap with<br />
the enclosed screws and nuts.<br />
Replacement of heels<br />
Replacement of heels is especially<br />
important for rental shops.<br />
1. Unscrew the worn heels and remove<br />
them. If the screws cannot be unscrewed<br />
with a screwdriver, use a<br />
side cutter to remove them.<br />
2.Put the new heels on the boot and<br />
secure them with the enclosed<br />
screws.<br />
Care: Observe the following rules to avoid damage or excess wear of material and mechanisms.<br />
• Use only water for cleaning the ski boots.<br />
• Do not use chemicals for cleaning.<br />
• After skiing, do not dry the inner boot in front of heat sources, such as heaters, open fireplaces, etc.<br />
• Let the ski boot dry thoroughly before storing them for prolonged periods.<br />
• Store the ski boots with open mechanisms and (loosely) closed buckles.<br />
• Keep the ski boots in a dry place, ideally in their original packaging.
Change language