4 channel surveillance - MikeCooperDesign.com

RECORD SETUPRECORD FRAME RATE1 O N 2 NOrecord setup1 3 FPS 2 5 FPSrecord FramerateTOTAL 36 FPS3 O N 4 O N3 2 5FPS 4 3FPS( )MOVE ( SEL) SELECT (MENU) ESC( )MOVE (SEL)+ ( )- (MENU) EXIT1.2.3.The Record Setup sub-menu allowsyou to choose which channels (cameras)will record.In the Record Setup sub-menu, pressthe arrow keys [ , , and ] toselect a channel (camera).Press [SEL] to change the settingbetween “on” or “off”.Press [MENU] to exit the RecordSetup sub-menu once all the camerachannels have been set.Note: If a channel has been disabled (setto “off”) in the Channel Setup, it willnot be able to record, and “NOCAM”will display for that channel on thescreen in the Record Setup submenu.1.2.3.4.The total number of photos takenper second is divided among thecameras. The total frame rate of allthe cameras in use is set to 60fps(frames per second). The higher settingsproduce better images, but useup more hard drive space.In the Record Frame Rate sub-menu,press the arrow keys [ , , and] to select a channel (camera).Press [SEL] to increase, or STOPto decrease, the number of framesper second for that camera.Repeat step 1 and 2 for each camera,keeping the total number offrames per second (displayed in thecenter of the screen) at or below 60.Press [MENU] to exit the RecordFrame Rate sub-menu once all thecamera frame rates have been set.Note: The DVR will automatically adjustthe largest frame rate to a smallervalue if you enter more than a total of60fps for all the cameras.Note: If you have your DVR set to PAL,your maximum framerate is 50fps.SKU 67139 For technical questions, please call 1-800-444-3353. Page 19