Download

Commissioning and operationRepresentation of monitor pagesThe analog engine data provided by the MMDS is distributed on 4 monitor pages. Oneach page, the current engine speed is displayed in the top line. The 1st page continueswith the most important engine data such as oil pressure, coolant pressure, charge-airpressure and oil pressure in the gearbox. Other engine and gearbox data, as well as exhausttemperatures and supplementary information is shown on the subsequent pages:Page 1Actual value (example)P1 Engine speed 2100 rpmOil pressure, engine 4,3 barCoolant temperature, engine 82 °CCharge-air temperature 41 °COil pressure, gearbox 19 barPage 2Actual value (example)P2 Engine speed 2100 rpmCoolant pressure compensator 830 mbarreservoirCoolant pressure water pump 3,9 barOil temperature, engine 103 °CBattery voltage 27,1 VPage 3Actual value (example)P3 Engine speed 2100 rpmIntake air vacuum 30 mbarCharging pressure 1,86 barExhaust temperature T.A. 629 °CExhaust temperature T.B. 613 °CPage 4Actual value (example)P4 Engine speed 2100 rpmFuel consumption 162 l/hEngine load 79 %The pages are scrolled using the “PAGE” key. Each time the key is pressed, the screenmoves up to the next page. After page 4, page 1 appears again.For the display of current alarms and warnings, an alarm screen has been included. Thisis called up using the “ALARMS” key. If there is no alarm, the message “no message”appears on the screen.A1> no message24