Download

Commissioning and operation“Gearbox forwards / reverse” (lock) position ÁIn this lever position, two different functions are possible.1. Standard function:The gearbox clutch is engaged to “Forwards” or “Reverse”; the power unit is idling.2. “Increase engine speed” function:The “Increase engine speed” function is set (function switch II–8). The engine speedof the power unit is raised prior to engaging the clutch and after disengaging the clutchit is lowered again to idling speed. Between the clutch engaging operations, individualdelays (waiting periods BEFORE and AFTER clutch engaging) can be set.“Maximum engine speed” position ÂPosition  shows the “maximum engine speed” for the “Forwards and BackwardsRange”. Between positions Á and Â, the engine speed can be set variably.The gearbox clutch is engaged to “Forwards” or “Reverse”.Operating panel – command master for twin-engine systemsL1L2L3L4L5L6COMMANDSYNCHROTROLLINGCOMMANDSYN./TROL.T1L7L8T2Key “Command takeover” T1COMMANDThe “Command takeover” key occurs only once on the command master. Thekey is permanently illuminated weakly via LED L1 and indicates that the controlsystem is being supplied with voltage. The key serves to take over commandsonto the relevant control stand.The key has two other additional functions.33