Download

Maintenance and careDuring continuous operation position theselector lever that both filter halves are inoperation.Observe positions of selector lever!Caution:Do not leave selector lever in anyintermediate position because thiswould be liable to interfere with oilsupply. If in doubt stop engine tochange oil filter.Continuous operation(both filter halvesin operation)Right-hand filtercut outLeft-hand filtercut outRenewal of filter cartridgesD Allow the filter content to run off alongdrain plugs Ã.Hold a suitable vessel under hole18Danger:The oil is hot and under pressurewhen the drain plug is opened.Risk of burns and scalds.47D After releasing the clamping bolts Çremove filter bowls ÆD Renew filter cartridges Ä. Thoroughlyclean all other parts in cleaning fluid(do not allow cleaning fluid to enter theoil circuit)D Use new gaskets Å for reassembly offilter bowls425Note:To prevent the seal Å from twistinghold the filter bowl Æ firmlywhen tightening the tensioningscrew Ç.Caution:Used oil filters are classed as dangerouswaste and must be disposedof accordingly.31 Oil filter, standard design(non-changeover)2 Oil filter, changeover-type3 Selector cock4 Oil drain plugs5 Filter cartridge6 O-ring7 Filter bowl8 Clamping bolt652