15.08.2012 Views

2010 Nissan Murano Owner's Manual

2010 Nissan Murano Owner's Manual

2010 Nissan Murano Owner's Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

vibration occurs.<br />

The system helps deter vehicle theft but cannot<br />

prevent it, nor can it prevent the theft of interior<br />

or exterior vehicle components in all situations.<br />

Always secure your vehicle even if parking for a<br />

brief period. Never leave your keys in the vehicle,<br />

and always lock it when unattended. Be aware<br />

of your surroundings, and park in secure, well-lit<br />

areas whenever possible.<br />

Many devices offering additional protection,<br />

such as component locks, identification markers,<br />

and tracking systems, are available at auto<br />

supply stores and specialty shops. Your<br />

NISSAN dealer may also offer such equipment.<br />

Check with your insurance company to see if<br />

you may be eligible for discounts for various<br />

theft protection features.<br />

2-26 Instruments and controls<br />

SIC1699A<br />

How to arm the vehicle security system<br />

1. Close all windows.<br />

The system can be armed even if the<br />

windows are open.<br />

2. Push the ignition switch to the OFF position.<br />

3. Carry the Intelligent Key.<br />

4. Close all doors, hood and lift gate. Lock all<br />

doors. The doors can be locked with:<br />

. the lock button<br />

Key<br />

on the Intelligent<br />

. any request switch<br />

. the power door lock switch<br />

. the key — master or mechanical<br />

5. Confirm that the security indicator light *A<br />

comes on. The security indicator light stays<br />

on for about 30 seconds. The vehicle<br />

security system is now pre-armed. After<br />

about 30 seconds the vehicle security<br />

system automatically shifts into the armed<br />

phase. The security light begins to flash<br />

once every approximately 3 seconds. If,<br />

during this 30-second pre-arm time period,<br />

the door is unlocked, or the ignition switch is<br />

pushed to ACC or ON, the system will not<br />

arm.<br />

Even when the driver and/or passengers<br />

are in the vehicle, the system will activate<br />

with all doors, hood and lift gate locked<br />

with the ignition switch in the LOCK<br />

position. When pushing the ignition switch<br />

to the ACC or ON position, the system will<br />

be released.<br />

Vehicle security system activation<br />

The vehicle security system will give the following<br />

alarm:<br />

. The headlights blink and the horn sounds<br />

intermittently.<br />

. The alarm automatically turns off after<br />

approximately 1 minute. However, the alarm<br />

reactivates if the vehicle is tampered with<br />

again.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!