15.08.2012 Views

2010 Nissan Murano Owner's Manual

2010 Nissan Murano Owner's Manual

2010 Nissan Murano Owner's Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

switch and release it. Take your foot off the<br />

accelerator pedal. Your vehicle will maintain the<br />

set speed.<br />

. To pass another vehicle, depress the<br />

accelerator pedal. When you release the<br />

pedal, the vehicle will return to the previously<br />

set speed.<br />

. The vehicle may not maintain the set speed<br />

on winding or hilly roads. If this happens,<br />

drive without the cruise control.<br />

To cancel the preset speed, use one of the<br />

following methods:<br />

a) Push the CANCEL switch.<br />

b) Tap the brake pedal.<br />

c) Turn the MAIN switch off. The CRUISE light<br />

will turn off.<br />

. If you depress the brake pedal while pushing<br />

the RESUME/ACCELERATE or SET/<br />

COAST switch and reset at the cruising<br />

speed, the cruise control will disengage.<br />

Turn the MAIN switch off once and then turn<br />

it on again.<br />

. The cruise control will automatically cancel if<br />

the vehicle slows more than 8 MPH (13<br />

km/h) below the set speed.<br />

. If you move the selector lever to the N<br />

(Neutral) position, the cruise control will be<br />

canceled.<br />

To reset at a faster cruising speed, use one<br />

of the following methods:<br />

. Depress the accelerator pedal. When the<br />

vehicle attains the desired speed, push and<br />

release the SET/COAST switch.<br />

. Push and hold the RESUME/ACCELERATE<br />

switch. When the vehicle attains the desired<br />

speed, release the switch.<br />

. Push, then quickly release the RESUME/<br />

ACCELERATE switch. Each time you do<br />

this, the set speed will increase by about 1<br />

MPH (1.6 km/h).<br />

To reset at a slower cruising speed, use one<br />

of the following methods:<br />

. Lightly tap the brake pedal. When the<br />

vehicle attains the desired speed, push the<br />

SET/COAST switch and release it.<br />

. Push and hold the SET/COAST switch.<br />

Release the switch when the vehicle slows<br />

down to the desired speed.<br />

. Push, then quickly release the SET/COAST<br />

switch. Each time you do this, the set speed<br />

will decrease by about 1 MPH (1.6 km/h).<br />

To resume the preset speed, push and<br />

release the RESUME/ACCELERATE switch.<br />

The vehicle will resume the last set cruising<br />

speed when the vehicle speed is over 25 MPH<br />

(40 km/h).<br />

Starting and driving 5-19

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!