2010 Nissan Murano Owner's Manual

SIC3585
Instrument brightness control
The instrument brightness control operates
when the ignition switch is in the ON position.
Pushing the control switch *A once will change
the brightness to the night mode.
Pushing the control switch *B once will change
the brightness to the day mode.
To adjust the brightness of instrument panel
lights, push the control switches. Pushing the
upper switch *A will brighten the lights. When
the brightness reaches the maximum level, a
beep will sound. The lower switch *B dims the
lights. Repeatedly pushing the lower switch will
turn the lights off and a beep will sound.
SIC3671
TURN SIGNAL SWITCH
*1 Turn signal
Move the lever up or down to signal the turning
direction. When the turn is completed, the turn
signals cancel automatically.
*2 Lane change signal
To indicate a lane change, move the lever up or
down to the point where lights begin flashing.
SIC3672
FOG LIGHT SWITCH (if so equipped)
To turn the fog lights on, turn the headlight
switch to the position, then turn the switch
to the position. To turn them off, turn the
switch to the OFF position.
The headlights must be on for the fog lights to
operate.
Instruments and controls 2-35