2010 Nissan Murano Owner's Manual

incoming call list.
— Delete
Delete a contact that is registered in the
phonebook.
SAA1895
MAKING A CALL
To make a call, follow the procedures below.
1. Push the PHONE button on the instrument
panel or the button on the steering
wheel. The “PHONE” screen will appear on
the display.
2. Select the “Call (Phonebook)” key on the
“PHONE” menu, and push the ENTER
button.
3. Select the registered person’s name from
the list, and push the ENTER button. Dialing
will start and the screen will change to the
call-in-progress screen.
4-80 Monitor, heater, air conditioner, audio, phone and voice recognition systems
4. After the call is over, perform one of the
following to finish the call.
a. Select the “Hang up” key and push the
ENTER button.
b. Push the
wheel.
button on the steering
c. Push the PHONE button on the instrument
panel.
There are different methods to make a call.
Select one of the following options instead of
“Call (Phonebook)” in step 2 above.
. Redial
Dial the previously dialed number again.
. Call (Call Logs)
Select the name or phone number from the
incoming or outgoing call logs.
. Call (Downloaded)
Select the name or phone number from the
downloaded call list.
. Dial (Keypad)
Input the phone number manually using the
keypad displayed on the screen. (See
“HOW TO USE TOUCH SCREEN (models
with navigation system)” earlier in this
section.)