2010 Nissan Murano Owner's Manual

HOW TO USE MULTI-FUNCTION
CONTROLLER
Choose an item on the display using the main
directional buttons *2 (or additional directional
buttons *6 with navigation system) or center
dial *3 , and push the ENTER button *1 for
operation.
If you push the BACK button *4 before the
setup is completed, the setup will be canceled
and/or the display will return to the previous
screen. This button can also be used to delete
characters that have been input.
After the setup is completed, push the BACK
button *4 and return to the previous screen.
For the VOICE button *5 functions, refer to the
separate Navigation System Owner’s Manual.
HOW TO USE TOUCH SCREEN
(models with navigation system)
CAUTION
ately with soap and water.
. To clean the display, use a soft, dry
cloth. If additional cleaning is necessary,
use a small amount of
neutral detergent with a soft cloth.
Never use a rough cloth, alcohol,
benzine, thinner or any kind of
solvent or paper towel with a chemical
cleaning agent. They will
scratch or deteriorate the panel.
. Do not splash any liquid such as
water or car fragrance on the display.
Contact with liquid will cause
the system to malfunction.
To ensure safe driving, some functions cannot
be operated while driving.
The on-screen functions that are not available
while driving will be “grayed out” or muted.
Park the vehicle in a safe location and then
operate the navigation system.
. The glass screen on the liquid
crystal display may break if it is hit
with a hard or sharp object. If the
glass breaks, do not touch the liquid
crystalline material, which contains
a small amount of mercury. In case
of contact with skin, wash immedi-
4-4 Monitor, heater, air conditioner, audio, phone and voice recognition systems
SAA1542
Touch screen operation
With this system, the same operations as those
for the multi-function controller are possible
using the touch screen operation.
Selecting the item:
Touch an item to select. When you select the
“Audio” settings, touch the “Audio” area *1 on
the screen.
Touch the BACK *2 button to return the
previous screen.