15.08.2012 Views

2010 Nissan Murano Owner's Manual

2010 Nissan Murano Owner's Manual

2010 Nissan Murano Owner's Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

operation, push either of the OPEN *1 , CLOSE<br />

*2 or UP *5 of the switch.<br />

Tilting moonroof<br />

To tilt up the moonroof, push the moonroof<br />

switch to the up position *5 .<br />

To tilt down the moonroof, push the switch to the<br />

up position *5 or push the CLOSE side *2 of<br />

the switch.<br />

When the moonroof is tilted up, push the<br />

CLOSE side of the moonroof switch to the<br />

second detent *4 . The moonroof will tilt down<br />

and the sunshades will close.<br />

Auto reverse function<br />

WARNING<br />

There are some small distances immediately<br />

before the closed position which<br />

cannot be detected. Make sure that all<br />

passengers have their hands, etc., inside<br />

the vehicle before closing the<br />

moonroof.<br />

If the control unit detects something caught in<br />

the moonroof and sunshades when they are<br />

closing, the moonroof will be immediately<br />

opened.<br />

2-52 Instruments and controls<br />

The auto reverse function can be activated when<br />

the moonroof and sunshades are closed by<br />

automatic operation when the ignition switch is<br />

in the ON position or for about 45 seconds after<br />

the ignition switch is pushed to the OFF<br />

position.<br />

If the moonroof and sunshades cannot be<br />

closed automatically when the auto reverse<br />

function activates due to a malfunction, push<br />

and hold the CLOSE side *2 of the moonroof<br />

switch.<br />

Depending on the environment or driving<br />

conditions, the auto reverse function may<br />

be activated if an impact or load similar to<br />

something being caught in the moonroof<br />

occurs.<br />

If the moonroof does not operate<br />

If the moonroof does not operate properly,<br />

perform the following procedure to initialize the<br />

moonroof operation system.<br />

1. If the moonroof is open, close it fully by<br />

pushing the CLOSE side *2 of the moonroof<br />

switch.<br />

2. Push and hold the CLOSE side *2 of the<br />

moonroof switch.<br />

3. Release the moonroof switch after the<br />

moonroof or sunshade moves slightly to<br />

the closed position.<br />

4. Push and hold the CLOSE side *2 of the<br />

moonroof switch for 10 seconds.<br />

5. The moonroof and sunshades will fully open<br />

and then close.<br />

6. Check if the moonroof switch operates<br />

normally.<br />

If the moonroof does not operate properly after<br />

performing the procedure above, have your<br />

vehicle checked by a NISSAN dealer.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!