2010 Nissan Murano Owner's Manual

REPLACING
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab *A , and
move the wiper blade down the wiper arm
*1 .
3. Insert the new wiper blade onto the wiper
arm until a click sounds.
4. Rotate the wiper blade so that the dimple is
in the groove.
Contact a NISSAN dealer for wiper blade rubber
replacement.
8-18 Maintenance and do-it-yourself
CAUTION
SDI2048
. After wiper blade replacement, return
the wiper arm to its original
position; otherwise it may be damaged
when the hood is opened.
. Make sure the wiper blades contact
the glass; otherwise the arm may be
damaged from wind pressure.
SDI2199
Be careful not to clog the washer nozzle *A .
This may cause improper windshield washer
operation. If the nozzle is clogged, remove any
objects with a needle or small pin *B . Be
careful not to damage the nozzle.