2010 Nissan Murano Owner's Manual

Type A
SPA2422A
SPA2450
Type B
3-28 Pre-driving checks and adjustments
Automatic anti-glare type
The inside mirror is designed so that it
automatically changes reflection according to
the intensity of the headlights of the following
vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed
to the ON position.
When the anti-glare system is turned on, the
indicator light *A will illuminate and excessive
glare from the headlights of the vehicle behind
you will be reduced.
Type A: Push the switch *B to make the
inside rearview mirror operate normally and the
indicator light will turn off. Push the switch
again to turn the system on.
Type B: Push the “*” switch *C to make the
inside rearview mirror operate normally. The
indicator light will turn off. Push the “I” switch
*D to turn the system on.
Do not allow any object to cover the
sensors *E or apply glass cleaner on
them. Doing so will reduce the sensitivity
of the sensor, resulting in improper operation.
For the compass (if so equipped) operation, see
“COMPASS” in the “2. Instruments and controls”
section.
For the HomeLink ® Universal Transceiver operation,
see “HomeLink ® UNIVERSAL TRANSCEI-
VER” in the “2. Instruments and controls”
section.