PT-36 Mechanized Plasmarc Cutting Torch Instruction Manual

More documents

Recommendations

Info

section 1safety precautionsWARNINGWELDING AND PLASMA CUTTING CAN BE INJURIOUS TO YOURSELFAND OTHERS. TAKE PRECAUTIONS WHEN WELDING OR CUTTING. ASKFOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE BASEDON MANUFACTURERS’ HAZARD DATA.ELECTRIC SHOCK - Can kill.- Install and earth (ground) the welding or plasma cutting unit in accordance with applicable standards.- Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.- Insulate yourself from earth and the workpiece.- Ensure your working stance is safe.FUMES AND GASES - Can be dangerous to health.- Keep your head out of the fumes.- Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zoneand the general area.ARC RAYS - Can injure eyes and burn skin.- Protect your eyes and body. Use the correct welding / plasma cutting screen and filter lens and wearprotective clothing.- Protect bystanders with suitable screens or curtains.FIRE HAZARD- Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.NOISE - Excessive noise can damage hearing.- Protect your ears. Use earmuffs or other hearing protection.- Warn bystanders of the risk.MALFUNCTION - Call for expert assistance in the event of malfunction.READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.PROTECT YOURSELF AND OTHERS!136
section 2DEscription2.1 GeneralThe PT-36 Mechanized Plasmarc Cutting Torch is a plasma arc torch factory assembled to provide torch componentconcentricity and consistent cutting accuracy. For this reason, the torch body can not be rebuilt in the field.Only the torch front-end has replaceable parts.2.2 ScopeThe purpose of this manual is to provide the operator with all the information required to install and servicethe PT-36 Mechanized Plasmarc Cutting Torch. Technical reference material is also provided to assist in troubleshootingthe cutting package.2.3 Package Options AvailablePT-36 package options available through your ESAB dealer. See Replacement Parts section for component partnumbers.DESCRIPTIONS FOR PT-36 TORCH ASSEMBLY'SPART NUMBERPT-36 TORCH AY 4.5 ft (1,3m) 0558003849PT-36 TORCH AY 6 ft (1,8m) 0558003850PT-36 TORCH AY 12 ft (3,7m) 0558003852PT-36 TORCH AY 15 ft (4,6m) 0558003853PT-36 TORCH AY 17 ft (5,2m) 0558003854PT-36 TORCH AY 25 ft (7,6m) 0558003856PT-36 TORCH AY 14 ft MINI-BEVEL (4,3m) 0558005741137
Page 2 and 3: Be sure this information reaches th
Page 4 and 5: table of contents134
Page 8 and 9: section 2DEscription2.4 Optional Ac
Page 10 and 11: section 2DEscriptionPT-36 600A Star
Page 12 and 13: section 2DEscription142
Page 14 and 15: section 3INstallation3.1.2 Connecti
Page 16 and 17: section 4operationWARNINGExplosion
Page 18 and 19: section 4operationcautionBefore att
Page 20 and 21: section 4operation4.2.4. Surface Fi
Page 22 and 23: section 4operation4.3 Torch Flow Pa
Page 24 and 25: section 5Maintenance5.2 Torch Front
Page 26 and 27: section 5Maintenance7. Remove elect
Page 28 and 29: section 5Maintenance4. Unscrew nozz
Page 30 and 31: section 5Maintenance5.4 Assembly Of
Page 32 and 33: section 5Maintenance3. Screw electr
Page 34 and 35: section 5Maintenance5.7 Removal and
Page 36 and 37: section 5Maintenance4. To install t
Page 38 and 39: section 5MaintenanceChecking for Co
Page 40 and 41: section 5Problem: Failure to startS
Page 42: section 5Maintenance172

PT-36 Mechanized Plasmarc Cutting Torch Instruction Manual

Create successful ePaper yourself

Delete template?

Save as template?