Operation Manual - Mrclab.com

HPLC-8100 HPLC ChromatographD2 LAMP ENERGY SMPL 0.794583USED TIME 50.3 h REF. 0.401205SERIAL 825365 Option1:D2 OFF 2:WAVE CALIB [Enter]BFRL UV/VIS DETECTORSN. 825282 Rev: 1.70Fig. 13Menu sequence of UV detectorDescribe every menu in details as follows. When the parameter on the menu is required tomodify, use the data input key to modify the setting of the corresponding parameter. Thus pressthe “ENTER” key,the moment the value just input is confirmed. If error parameter is input, use“CE”key to delete it, then input the correct one according to the procedures mentioned above.Signal menuABS -0.0001AU LAMP IS LITWAVE254nmSignal menu(or main menu)includes: absorbance(signal intensity),D 2 lamp status andwavelength. Absorbance is in unit of “AU”. D 2 lamp status shows “ON” and “OFF”. Thewavelength is in unit of“nm”.The signal value for real measurement displays in four digits. The wavelength range is from 190to 740nm for arbitrary setting.Response time menuRESPONCEPress [Enter] TO Change1.00 (0.05-10)SUse the response time (time constant) to make the signal smooth. Press ENTER key to select theinput. Respectively set: 0.05,0.10,0.15,0.20,0.25,0.30,0.35,0.40,0.45,0.50,0.55,0.60,0.65,0.70,0.75,0.80,0.85,0.90,0.95,1.00,1.50,2.00,2.50,3.00,3.50,4.00,4.50,5.00,6.00,7.00,8.00,9.00,10.00sec. The value is more bigger, the signal is more smooth.Time constant of 1second. is satisfied with the most of the analysis requirements.D 2 lamp energy and using time menuD 2 LAMP ENERGY SMPL 0.794583USED TIME 50.3 h REF 0.401205D 2 lamp energy menu displayed is the energy values of ultraviolet light received from the16