Operation Manual - Mrclab.com

HPLC-8100 HPLC Chromatographplotting coordinate scale and display of the hold time to secure observing the graphics clearlyeven in a small size window.Time coordinate scale——It is used as X axle coordinate scale, in unit: Min. The initial value isautomatically adjusted with the change of the sampling time. Modify the full time difference on“screen plotting parameter edition”, minimum time is 1min.Level coordinate scale——It is used as Y axle coordinate scale of the spectrogram plotting, inunit : Mv. Modify the full scale maximum value and minimum value on “screen plottingparameter”.Peak hold time — — During starting sampling, automatically display the hold time afterappearing the chromatograph peak top. In the “screen plotting parameter edition”, select “nodisplay the hold time” to close it.Running indicating lampThe red lamp is flash when the data is acquiring, while the green lamp is lit under the state ofpreparationInformation lineIt displays currently inputting level, sampling time, current sample name and current time.As the main page mentioned above, when you select some command in the main menu orsingle-click some of prompt button, the corresponding window or dialogue block will beappeared.Operation of work station1. Preparation of work station before the operationBefore operating the work station, HPLC-8100 series HPLC Chromatograph should be connectedwith the computer installed the work station software. Power the instrument on. Whencompleting the self test of the instrument, the computer displays the following page, That showsthe connection of the computer is successful.Success for the connectionCurrent WavelengthCurrent setting flow Fig 2Current pressure of25