Rex Linkbelt Roller Chain Catalog - Norfolkbearings.com

Chain Repair ToolsChain BreakersChain Breakers are quality tools with forged jaws. The "push-out'' pins are of tempered alloy steel. They simplify the disassembly of roller chainand are available in two sizes.Overall length.......................................................................6 inchesOverall width........................................................................3 inchesWeight..................................................................................11 oz.For disassembly of:Single pitch chains Nos. 25 through 60 ( 1 / 4-, 3 / 8-, 1 / 2-, 5 / 8-,and 3 / 4-inch pitch)Double-Pitch chains, 1- and 1 1 / 4-inch pitch.Overall length................................................................. 10 3 / 4inchesOverall width.................................................................. 3 inchesWeight............................................................................ 26 oz.For disassembly of:Single pitch chains Nos. 60 through 100 ( 3 / 4-, 1-, 1 / 4-inch pitch)Double-Pitch chains, 1 1 / 2- and 2-inch pitch.Chain VisesChain Vises are used in disassembly or connecting single or multiple strand roller chain with the use of a hammer and punch. The vises aremade of forged steel with hardened jaws specially shaped for adapting to various chain sizes. Two sizes are available.For single strand standard chain 1 / 2- through 1-inch pitch.For Double Pitch chain of 1-, 1 1 / 4 -, and 1 1 / 2-inch pitch.For double strand chain of 1 / 2-, 5 / 8-, and 3 / 4-inch pitch.Net weight each, 5 1 / 2pounds.Note: Breakers and Vises cannot be used with Carrier Roller Chain.To avoid personal injury or property damage, persons connecting ordisconnecting chain, and other personnel in the vicinity, must:• Always lock out equipment power switches before removing orinstalling chains.• Always use safety glasses to protect eyes. Wear protective clothing,gloves and safety shoes.• Support the chain to prevent uncontrolled movement of the chainand parts.WARNING*55For single strand chain from 1- through 2-inch pitch.For double strand chain of 1-, 2-inch pitch.Net weight each, 28 1 / 2pounds (including ratchet wrench).• Maintain tools in proper condition and assure their proper use.Use of pressing equipment is recommended.• Not attempt to connect or disconnect chain unless chain constructionis clearly known and understood.• Use only subassemblies, as opposed to individual componentparts, built by the chain manufacturer for assembling chainstrands.• Not use any sections of damaged chains because they may havebeen overloaded and yielded.GG-5