Rex Linkbelt Roller Chain Catalog - Norfolkbearings.com

Conveyor ChainsHollow Pin ChainLink-Belt ® Hollow Pin chain is identical to ANSI Standard RollerChain in pitch, roller width, and roller diameter. It is quality designedfor long wear life in conveyor applications. The “hollow pin” featureprovides unlimited conveyor design versatility.Link-Belt Hollow Pin chain is available in single pitch series orDouble-Pitch series. The Double-Pitch series is furnished eitherrollerless or with large-diameter carrier rollers constructed of steelor Delrin.Single PitchCarrier Roller TypeAdvantages: Attachments or crossrods can be inserted at anydesired spacing, which provides great design versatility. Changescan be made without removing the chain from the conveyor.Ease of assembly of attachments or crossrods reduces assemblycosts and maintenance time. There is less down-time in the eventof a conveyor jam-up.ABEPITCHDTWStandard ANSI sprockets can be used except on large-diametercarrier roller chain.The type of connecting link used for all Hollow Pin chain is retainingring (RR).I.D.HSprockets: Single pitch Hollow Pin chain uses standard stocksprockets. Double-Pitch Hollow Pin chain uses Double-Pitchsprockets.DCONN LINKRETAINING RING TYPERRCLK HOLLOWPINLINKDouble PitchCarrier Roller TypeNote:Attachments: Attachments of the A, K, M and D types areavailable as full extra connecting links with normal pins which insertthrough the hollow pins and are fastened on the other side byspring clips. This means that attachment assemblies are wider thanthe standard chain as shown on the attachment pages following.There are no attachments available for the inside (roller) links.Since the connecting link for the Hollow Pin chain is in itself a widerassembly than the standard Hollow Pin chain, the connecting linkwill not accept an attachment.ABEDW CTPITCHPITCHABEDW CTPITCHPITCHCONNECTING LINKSPRING CLIPTYPE SCCLKChain NumbersCarrierSingle Roller-less RollerPitch Double DoublePitch PitchPIN LINKRIVETEDTYPE RIVPIN LINKDOUBLE COTTERTYPE DCCONNECTING LINCOTTERTYPE CTCLKCTPDimensions, Strengths, and WeightsNOTE: Riv. EXCEPT Conn. FOR CARRIER ROLLER, DRAWINGBushingLink PlateEnd ALSO APPLIES End TO ROLLERLESS TYPEOver-Allto to WidthPitch Width Diam. Center Center C Height ThicknessLine LineRetW D A B Riv. Ring H T E Min.45HP . . . . . . 0.500 0.31 0.31 0.33 0.38 0.66 0.69 0.47 0.06 0.22 0.16 2,500 1,750 0.38. . . C2045HP . . . 1.000 0.31 0.31 0.33 0.38 0.66 0.69 0.47 0.06 0.22 0.16 2,500 1,750 0.31. . . . . . C2042HP 1.000 0.31 0.63 0.33 0.38 0.66 0.69 0.47 0.06 0.22 0.16 2,500 1,750 0.5455HP . . . . . . 0.625 0.38 0.40 0.41 0.44 0.80 0.84 0.59 0.08 0.28 0.20 4,400 2,540 0.63. . . C2055HP . . . 1.250 0.38 0.40 0.41 0.44 0.80 0.84 0.59 0.08 0.28 0.20 4,400 2,540 0.51. . . . . . C2052HP 1.250 0.38 0.75 0.41 0.44 0.80 0.84 0.59 0.08 0.28 0.20 4,400 2,540 0.8465HP . . . . . . 0.750 0.50 0.47 0.50 0.55 0.98 1.03 0.69 0.09 0.33 0.24 6,000 5,100 0.88. . . C2065HP . . . 1.500 0.50 0.47 0.50 0.55 0.98 1.03 0.69 0.09 0.33 0.24 6,000 5,100 0.75. . . . . . C2062HP 1.500 0.50 0.88 0.50 0.55 0.98 1.03 0.69 0.09 0.33 0.24 6,000 5,100 1.2085HP . . . . . . 1.000 0.63 0.63 0.61 0.70 1.22 1.32 0.94 0.13 0.44 0.31 12,000 11,750 1.60. . . C2085HP . . . 2.000 0.63 0.63 0.67 0.77 1.34 1.44 0.94 0.16 0.44 0.31 12,000 11,750 1.50. . . . . . C2082HP 2.000 0.63 1.13 0.67 0.77 1.34 1.44 0.94 0.16 0.44 0.31 12,000 11,750 2.25Note: Dimensions subject to change. Certified dimensions of ordered material furnished on request.D-10PIN LINKLONG SINGLE COTTERTYPE LCPin DiameterOutDiam.InsideDiam.OFFSET LINKTYPEOLKCTPAverageUltimateStrength,Lbs.MinimumUltimateStrength,Lbs.AverageWeightPerFoot,Lbs.