IronPort - Configuration Guide - AsyncOS 7.6.1

Contents
iv
Command Line Interface (CLI) 2-5
Command Line Interface Conventions 2-6
General Purpose CLI Commands 2-9
CHAPTER 3 Setup and Installation 3-1
Installation Planning 3-1
Before You Begin 3-1
Installation Scenarios 3-3
Support Languages 3-5
Physical Dimensions 3-5
Physically Connecting the Cisco IronPort Appliance
to the Network 3-6
Configuration Scenarios 3-6
Preparing for Setup 3-8
Determine Method for Connecting to the Appliance 3-9
Determining Network and IP Address Assignments 3-9
Gathering the Setup Information 3-10
Using the System Setup Wizard 3-13
Accessing the Web-Based Graphical User Interface (GUI) 3-13
Running the Web-Based System Setup Wizard 3-14
Configuring Active Directory 3-24
Proceeding to the Next Steps 3-25
Accessing the Command Line Interface (CLI) 3-25
Running the Command Line Interface (CLI) System Setup Wizard 3-26
What’s Next: Understanding the Email Pipeline 3-38
CHAPTER 4 Understanding the Email Pipeline 4-1
Overview: Email Pipeline 4-1
Incoming / Receiving 4-4
Host Access Table (HAT), Sender Groups, and Mail Flow Policies 4-4
Received: Header 4-5
Default Domain 4-5
Bounce Verification 4-5
Domain Map 4-5
Recipient Access Table (RAT) 4-5
Alias Tables 4-5
LDAP Recipient Acceptance 4-6
SMTP Call-Ahead Recipient Validation 4-6
Work Queue / Routing 4-6
Cisco IronPort AsyncOS 7.6 for Email Configuration Guide
OL-25136-01