IronPort - Configuration Guide - AsyncOS 7.6.1

Chapter 15 System Administration
OL-25136-01
Figure 15-20 The Edit Time Settings Page
Editing the Network Time Protocol (NTP) Configuration (Time Keeping Method)
Step 1 Click Edit Settings on the System Administration > Time Settings page. The Edit Time Settings page is
displayed.
Step 2 In the Time Keeping Method section, select Use Network Time Protocol.
Step 3 Enter an NTP server address and click Add Row. You can add multiple NTP servers.
Step 4 To delete an NTP server from the list, click the trash can icon for that server.
Step 5 Select an interface for NTP queries. This is the IP address from which NTP queries should originate.
Step 6 Submit and commit your changes.
Setting System Time (not using NTP Server)
Step 1 Click Edit Settings on the System Administration > Time Settings page. The Edit Time Settings page is
displayed.
Step 2 In the Time Keeping Method section, select Set Time Manually.
Step 3 Enter the month, day, year, hour, minutes, and seconds.
Step 4 Select A.M or P.M.
Step 5 Submit and commit your changes.
Cisco IronPort AsyncOS 7.6 for Email Configuration Guide
15-49