Card_Value_Center_Us.. - Smart Vend Corporation

SchlumbergerCard Value Center User's Guide4 Initialization and Software SetupThe CVC allows you to specify its operating characteristics by offering you options forcertain functions. From these options, you can customize your CVC unit to best suityour needs and preferences. To specify which operating characteristics you desire,you must program the CVC. This chapter describes the procedures necessary toprepare the CVC software for use. These procedures include:Entering Management ModeInitializing the UnitConfigure HardwareSetting Group CodesSetting Hardware OptionsSetting Card MaximumSetting the ClockSetting Bonus TransactionsSetting Bonus Mode and Bonus LevelSetting Viewing of Frequency CountersSetting Frequency ProgramsSetting Card CostSetting Bill AllowanceSetting Auto Disable and Auto Disable TimeSetting the ToneSetting RECAP Comms (only required if RECAP Software is being used)Setting On-line Communications (required for Online systems only)Set Account Options (required for Online Systems only)Setting Up the Swipe Reader (required for Online Systems only)☞Before beginning these procedures, you must have completed the hardware setupprocedures in Chapter 3. Read "Before You Begin" on the next page.If you are using the CVC in conjunction with RECAP Software, you only need toinitialize the CVC , set the password, and set up the communications parameters. Theremaining procedures are then controlled by RECAP Software.Initialization and Software Setup 4-1