D-Link AirPlus Xtreme G DI-624 - ftp - D-Link

Using the Configuration Menu (continued)Home > WAN > Dynamic IP AddressDI-754DynamicIP Address-Host Name-MAC Address-CloneMAC Address-Primary/Secondary DNSAddress-MTU-Choose Dynamic IP Address to obtain IP Address informationautomatically from your ISP. Select this option if your ISP doesnot give you any IP numbers to use. This option is commonlyused for Cable modem services.The Host Name is optional but may be required by some ISPs.The default host name is the device name of the Router and maybe changed.The default MAC Address is set to the WAN’s physical interfaceMAC address on the Broadband Router. It is not recommendedthat you change the default MAC address unless requiredby your ISP.The default MAC address is set to the WAN’s physical interfaceMAC address on the Broadband Router. You can use the “CloneMAC Address” button to copy the MAC address of the EthernetCard installed by your ISP and replace the WAN MAC addresswith the MAC address of the router. It is not recommended thatyou change the default MAC address unless required by yourISP.Enter a DNS Address if you do not wish to use the oneprovided by your ISP.Enter an MTU value only if required by your ISP. Otherwise, leaveit a the default setting.14