D-Link AirPlus Xtreme G DI-624 - ftp - D-Link

More documents

Recommendations

Info

Using the Configuration Menu (continued)Advanced > DMZIf you have a client PC that cannot run Internet applications properly from behind theDI-624, then you can set the client up for unrestricted Internet access. It allows acomputer to be exposed to the Internet. This feature is useful for gaming purposes.Enter the IP address of the internal computer that will be the DMZ host. Adding aclient to the DMZ (Demilitarized Zone) may expose your local network to a variety ofsecurity risks, so only use this option as a last resort.DMZ-IP Address-Enable or Disable the DMZ. The DMZ (Demilitarized Zone)allows a single computer to be exposed to the internet. Bydefault the DMZ is disabled.Enter the IP Address of the computer to be in the DMZ28
Using the Configuration Menu (continued)Advanced > PerformanceWirelessPerformance-Displayed in this window arethe Wireless Performancefeatures for the Access Pointportion of the DI-624.TX Rates-Auto is the default selection.Selct from the drop downmenu.Beacon Interval-RTS Threshold-Fragmentation-DTIM interval-Preamble Type-SSID Broadcast-Beacons are packets sent by an Access Point to synchronize awireless network. Specify a value. 100 is the default setting andis recommended.This value should remain at its default setting of 2432. If inconsistentdata flow is a problem, only a minor modification should bemade.The fragmentation threshold, which is specified in bytes, determineswhether packets will be fragmented. Packets exceedingthe 2346 byte setting will be fragmented before transmission.2346is the default setting(Delivery Traffic Indication Message) 3 is the default setting. ADTIM is a countdown informing clients of the next window forlistening to broadcast and multicast messages.Select Short or Long Preamble. The Preamble defines thelength of the CRC block (Cyclic Redundancy Check is a commontechnique for detecting data transmission errors) for communicationbetween the wireless router and the roaming wirelessnetwork adapters. Note: High network traffic areas shoulduse the shorter preamble type.Choose Enabled to broadcast the SSID across the network.All devices on a network must share the same SSID (ServiceSet Identifier) to establish communication. Choose Disabledif you do not wish to broadcast the SSID over the network.29
Page 1 and 2: D-Link AirPlus Xtreme GDI-624High-S
Page 3 and 4: Package ContentsContents of Package
Page 5 and 6: ConnectionsAll Ethernet Ports (WAN
Page 7 and 8: Features• Fully compatible with t
Page 9 and 10: Wireless Basics (continued)Standard
Page 11 and 12: Getting StartedSetting up aWireless
Page 13 and 14: Using the Configuration Menu (conti
Page 25 and 26: Using the Configuration MenuAdvance
Page 27: Using the Configuration Menu (conti
Page 41 and 42: Networking BasicsPlease follow all
Page 43 and 44: Networking BasicsPlease wait while
Page 45 and 46: Networking BasicsPlease read the in
Page 47 and 48: Networking BasicsNaming your Comput
Page 49 and 50: Networking BasicsChecking the IP Ad
Page 51 and 52: Networking BasicsAssigning a Static
Page 53 and 54: Networking BasicsSelecting a Dynami
Page 55 and 56: TroubleshootingThis Chapter provide
Page 57 and 58: Troubleshooting3. Check that the dr
Page 59 and 60: Troubleshooting4. What variables ma
Page 61 and 62: Troubleshooting8. Resetting the DI-
Page 63 and 64: Technical SpecificationsLEDs:• Po
Page 65 and 66: Frequently Asked QuestionsWhy can´
Page 67 and 68: Frequently Asked Questions (continu
Page 79 and 80:
Frequently Asked Questions (continu
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Technical SupportYou can find softw
Page 95 and 96:
• The customer must submit with t
show all

D-Link AirPlus Xtreme G DI-624 - ftp - D-Link

Create successful ePaper yourself

Delete template?

Save as template?