E Snake Manual - Whirlwind

4.3.1 Transmit (Tx) Bundle AssignmentTransmit (Tx) bundles send the digitized audio created from the ES unit’s analog inputs onto theCobraNet network. Type the desired bundle number into the box. Select each input box with amouse click or use the TAB key to advance through the assignment boxes.Beside each bundle box are dropdown tabs, which assign the analog audio inputs to each digitalaudio channel within the bundle. The dropdown menu contains all the analog inputs that areavailable according to the input boards configured. An analog input may be assigned to morethan one digital channel on multiple transmitters.The Default button resets the mapping of analog inputs to consecutive digital audio inputs.Analog channel 1 appears as digital channel A on Tx1, analog channel 2 is channel B on Tx1,etc. based on the input boards configured.4.3.2 Receive (Rx) Bundle AssignmentReceive (Rx) bundles receive the digital audio from the CobraNet network. Type the desiredbundle number into the box to receive the digital audio from the appropriate transmitters on thenetwork. The Rx bundles contain the digital audio signals in the same positions A-H that they areencoded into in the Tx bundle.Beside each bundle box are dropdown tabs, which assign the digital audio channels A-H to anyof the analog outputs. The dropdown menu contains all the analog outputs that are availableaccording to the output boards configured. A digital audio channel may be assigned to more thanone analog audio output.The Default button resets the mapping of digital audio channels to consecutive analog audiooutputs.Digital channel A on Rx1 appears as analog channel 1, digital channel B on Rx1 is channel 2,etc. based on the input boards configured.4.3.3 Saving Architecture and View Control FileSelect - or , accept the default storage location or navigate to adifferent folder, name the file and select . When the architecture editor is closed, you arereturned to the screen from where the Architecture Editor was invoked.4.3.4 Validate Current SettingsSelect - . The application will check the settings for conflictsand report if any are found.