Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

More documents

Recommendations

Info

Standard cylinders DNC, ISO 15552Ordering dataWearing parts kitsPart No. Type Part No. TypePiston ∅ Basic version S6 – Heat-resistant seals up to max. 120 °C32 369 195 DNC-32-…-PPV-(A) 384 214 DNC-32-…-PPV-(A)-S640 369 196 DNC-40-…-PPV-(A) 384 215 DNC-40-…-PPV-(A)-S650 369 197 DNC-50-…-PPV-(A) 384 216 DNC-50-…-PPV-(A)-S663 369 198 DNC-63-…-PPV-(A) 384 217 DNC-63-…-PPV-(A)-S680 369 199 DNC-80-…-PPV-(A) 384 218 DNC-80-…-PPV-(A)-S6100 369 200 DNC-100-…-PPV-(A) 384 219 DNC-100-…-PPV-(A)-S6125 369 201 DNC-125-…-PPV-(A) 384 220 DNC-125-…-PPV-(A)-S622 Internet: www.festo.com/catalogue/...Subject to change – 2010/02
Standard cylinders DNC-KP, standard hole pattern, with clamping unitTechnical dataFunctionDNC-…-KPWithout position sensing-N- Diameter32 … 125 mm-T- Stroke length10 … 2,000 mm-W- www.festo.comDNC-…-A-…-KPWith position sensingWearing parts kits 30-H- NoteAdditional measures are required foruse in safety-related applications; inEurope, for example, the standardslisted under the EC MachineryDirectivemustbeobserved.Withoutadditional measures in accordancewith statutory minimum requirements,the product is not suitable foruse in safety-related sections ofcontrol systems.General technical dataPiston ∅ 32 40 50 63 80 100 125Pneumatic connection Cylinder Gx G¼ G¼ Gy Gy G½ G½KP M5 Gx Gx Gx Gx Gx GxPiston rod thread M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2K3 M6 M8 M10 M10 M12 M12 M16K5 M10 M12 M16 M16 M20 M20 M27Max. axial backlash with [mm] 0.5 0.7 1clamped piston rod withoutloadConstructional designPistonPiston rodProfile barrelClamping unitCushioningFlexible cushioning rings/pads at both endsPneumatic cushioning, adjustable at both endsCushioning length PPV [mm] 20 20 22 22 32 32 42Position sensingVia proximity sensorType of mountingVia female threadVia accessoriesMounting positionAnyClamping type with effective direction At both ends-H- Note: This product conforms with the ISO 1179-1 standard and the ISO 228-1 standard.Operating and environmental conditionsOperating mediumFiltered compressed air, lubricated or unlubricatedOperating pressure [bar] 1.5 … 10Min. release pressure [bar] 3Ambient temperature 1) [°C] –10 … +80Corrosion resistance class CRC 2) 2CertificationGermanischer Lloyd1) Note operating range of proximity sensors2) Corrosion resistance class 2 as per Festo standard 940 070Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants orlubricating agents.2010/02 – Subject to change Internet: www.festo.com/catalogue/...23
Page 1 and 2: Standard cylinders DNC, ISO 15552
Page 3 and 4: Standard cylinders DNC, ISO 15552Ke
Page 5 and 6: Standard cylinders DNC, ISO 15552Pr
Page 7 and 8: Standard cylinders DNC, ISO 15552Pe
Page 9 and 10: Standard cylinders DNC, ISO 15552Te
Page 20 and 21: Standard cylinders DNC, ISO 15552Or
Page 24 and 25: Standard cylinders DNC-KP, standard
Page 32 and 33: Standard cylinders DNC-EL, standard
Page 38 and 39: Standard cylinders DNC-V1 … V6, s
Page 48 and 49: Standard cylinders DNC, ISO 15552Ac
Page 58 and 59: -V- NewBellows DADBStandard cylinde
Page 60 and 61: -V- NewBellows DADBStandard cylinde
Page 66: Festo North AmericaFesto Regional C

Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Create successful ePaper yourself

Delete template?

Save as template?