Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC, ISO 15552AccessoriesTrunnion flange ZNCF/CRZNGMaterial:ZNCF: Special steel castingCRZNG: Electrolytically polishedspecial steel castingFree of copper, PTFE and siliconeCannot be used on the bearing cap incombination with the bellows kitDADB + =plusstrokelengthDimensions and ordering dataFor ∅ C2 C3 TD TK TL TM US XH XL∅[mm] e9 Basic version KP32 71 86 12 16 12 50 45 18 128 17340 87 105 16 20 16 63 54 20 145 19850 99 117 16 24 16 75 64 25 155 22263 116 136 20 24 20 90 75 25 170 24680 136 156 20 28 20 110 93 32 188 283100 164 189 25 38 25 132 110 32 208 306125 192 217 25 50 25 160 131 40 250 375For ∅ Basic version High corrosion protectionCRC 1) Weight Part No. Type CRC 1) Weight Part No. Type[mm][g][g]32 2 130 174 411 ZNCF-32 4 150 161 852 CRZNG-3240 2 240 174 412 ZNCF-40 4 260 161 853 CRZNG-4050 2 390 174 413 ZNCF-50 4 430 161 854 CRZNG-5063 2 600 174 414 ZNCF-63 4 640 161 855 CRZNG-6380 2 1,150 174 415 ZNCF-80 4 1,300 161 856 CRZNG-80100 2 2,030 174 416 ZNCF-100 4 2,400 161 857 CRZNG-100125 2 3,490 174 417 ZNCF-125 4 3,600 185 362 CRZNG-1251) Corrosion resistance class 2 as per Festo standard 940 070Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants orlubricating agents.Corrosion resistance class 4 as per Festo standard 940 070Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required.50 Internet: www.festo.com/catalogue/...Subject to change – 2010/02