Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC-EL, standard hole pattern, with end-position lockingTechnical dataDimensions – Basic versionDownload CAD data www.festo.com1 Socket head screw with femalethread for mountingattachments2 Regulating screw for adjustableend-position cushioning3 Slot for proximity sensor + = plus stroke lengthDimensions – VariantsS2 – Through piston rodDownload CAD data www.festo.com+ = plus stroke length++ = plus 2x stroke length∅[mm]AMB∅d11BGD1∅f8D2 E EE G H1 H2 J1 J2 J3 KK L1132 22 30 16 13 M3 45 Gx 25.1 57.5 70 22.5 6 5.2 M10x1.25 1840 24 35 16 13 M3 54 G¼ 29.6 64 74 27 8 6 M12x1.25 21.550 32 40 17 20 M5 64 G¼ 29.6 78.5 93 32 10.4 8.5 M16x1.5 2863 32 45 17 20 M5 75 Gy 35.6 84.5 93 37.5 12.4 10 M16x1.5 28.580 40 45 17 20 M5 93 Gy 35.9 104.5 116 46.5 12.5 8 M20x1.5 34.7100 40 55 17 20 M5 110 G½ 38.8 113.5 116 55 12 10 M20x1.5 38.2∅L2 L3 L4 L7 MM∅PL RT TG VA VD WHZM ZJ ß1 ß2 ß3[mm]±232 94 13.8 12 3.3 12 15.6 M6 32.5 4 10 26 148 120 10 16 640 105 16.6 16.6 3.6 16 14 M6 38 4 10.5 30 167 135 13 18 650 106 17.1 17.1 5.1 20 14 M8 46.5 4 11.5 37 183 143 17 24 863 121 16.6 16.6 6.6 20 17 M8 56.5 4 15 37 199 158 17 24 880 128 19.9 19.9 10.5 25 16.4 M10 72 4 15.7 46 222 174 22 30 6100 138 22.8 22.8 8 25 18.8 M10 89 4 19.2 51 240 189 22 30 6-H- Note: This product conforms with the ISO 1179-1 standard and the ISO 228-1 standard.34 Internet: www.festo.com/catalogue/...Subject to change – 2010/02