Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC, ISO 15552AccessoriesFlange mounting FNC/CRFNG+ = plus stroke lengthMaterial:FNC: Galvanised steelCRFNG: High-alloy steelFree of copper, PTFE and siliconeCannot be used on the bearing cap incombination with the bellows kitDADBDimensions and ordering dataFor ∅ E FBMF R TF UF W ZF∅[mm] H13 Basic version KP32 45 7 10 32 64 80 16 130 17540 54 9 10 36 72 90 20 145 19850 65 9 12 45 90 110 25 155 22263 75 9 12 50 100 120 25 170 24680 93 12 16 63 126 150 30 190 285100 110 14 16 75 150 175 35 205 303125 132 16 20 90 180 210 45 245 370For ∅ Basic version High corrosion protectionCRC 1) Weight Part No. Type CRC 1) Weight Part No. Type[mm][g][g]32 2 240 174 376 FNC-32 4 240 161 846 CRFNG-3240 2 280 174 377 FNC-40 4 300 161 847 CRFNG-4050 2 520 174 378 FNC-50 4 550 161 848 CRFNG-5063 2 690 174 379 FNC-63 4 710 161 849 CRFNG-6380 2 1,650 174 380 FNC-80 4 1,680 161 850 CRFNG-80100 2 2,400 174 381 FNC-100 4 2,450 161 851 CRFNG-100125 2 3,750 174 382 FNC-125 4 3,660 185 363 CRFNG-1251) Corrosion resistance class 2 as per Festo standard 940 070Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants orlubricating agents.Corrosion resistance class 4 as per Festo standard 940 070Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required.2010/02 – Subject to change Internet: www.festo.com/catalogue/...49