Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combinationOrdering data – Modular products0OOptions0MExtendedmalethreadFemalethreadSpecialthreadSpecialspannerflatsExtendedpiston rodImprovedrunningperformanceClampingunitSlowspeed(constantmotion)RunningcharacteristicsCylinder/valvecombination…K2 K3 …K5 K7 …K8 K10 KP S10 S11 V1V2V3V4V5V6– – – – – 100K8 – – – – – V2Ordering tableSize 32 40 50 63 80 100 ConditionsCodeEntercode Extended male thread Pistonrodwithextendedmalethread0O [mm] 1…35 1…70 4 -…K2Female threadPistonrodwithfemalethread(M6) (M8) (M10) (M10) (M12) (M12) 5 -K3Special threadPistonrodwithspecialthreadM10 M12 M16 M16 M20 M20 6 -…K5Special spanner flats Pistonrodwithexternalhexagon 7 -K7Extended piston rodExtended piston rod[mm] 1 … 500 -…K8Improved running performance Smooth anodised aluminium coated piston rod 8 -K10Clamping unit Attached 9 -KPSlow speed (constant motion) Slow speed (constant motion at low piston speeds) aJ -S10Running characteristics Low friction aA -S110M Cylinder/valve combination Single solenoid valve, fitted on right, piston rod retracted when unactuated -V1Single solenoid valve, fitted on right, piston rod advanced when unactuated -V2Double solenoid valve, fitted on right -V3Single solenoid valve, fitted on left, piston rod retracted when unactuated -V4Single solenoid valve, fitted on left, piston rod advanced when unactuated -V5Double solenoid valve, fitted on left -V64 K2 Not with K3, K105 K3 With K5: on requestNot with K76 K5 Not with K107 K7 Not with Q, S2, K108 K10 Max. stroke: 1,000 mmNot with KP9 KP Without S2: position of the clamping unit at the bearing capNot with S10, S11aJ S10 Max. stroke: 500 mm; additional strokes on requestNot with S11aA S11 Max. stroke: 500 mm; additional strokes on requestTransfer order code– – – – – – – – – –2010/02 – Subject to change Internet: www.festo.com/catalogue/...45