Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

More documents

Recommendations

Info

Standard cylinders DNC-KP, standard hole pattern, with clamping unitOrdering dataWearing parts kitsPart No.TypePiston ∅ Basic version32 369 195 DNC-32-…-PPV-(A)40 369 196 DNC-40-…-PPV-(A)50 369 197 DNC-50-…-PPV-(A)63 369 198 DNC-63-…-PPV-(A)80 369 199 DNC-80-…-PPV-(A)100 369 200 DNC-100-…-PPV-(A)125 369 201 DNC-125-…-PPV-(A)30 Internet: www.festo.com/catalogue/...Subject to change – 2010/02
Standard cylinders DNC-EL, standard hole pattern, with end-position lockingTechnical dataFunctionDNC-…-A-…-ELWith position sensing-W- www.festo.comWearing parts kits 22-N- Diameter32 … 100 mm-H- Note-T- Stroke lengthAdditional measures are required for10 … 2,000 mm use in safety-related applications; inEurope, for example, the standardslisted under the EC MachineryDirectivemustbeobserved.Withoutadditional measures in accordancewith statutory minimum requirements,the product is not suitable foruse in safety-related t sections ofcontrol systems.General technical dataPiston ∅ 32 40 50 63 80 100Pneumatic connection Cylinder Gx G¼ G¼ Gy Gy G½EL M3 M5Piston rod thread M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5Max. axial backlash with [mm] ≤ 1.3 ≤ 2.1end position lockedConstructional designPistonPiston rodProfile barrelEnd-position locking ELB At both endsELV At frontELH At rearCushioningFlexible cushioning rings/pads at both endsPneumatic cushioning, adjustable at both endsCushioning length PPV 20 20 22 22 32 32[mm] EL 8.2 8.3 7.3 10.8 9.8 11.8Position sensingType of mountingMounting positionVia proximity sensorVia female threadVia accessoriesAny-H- Note: This product conforms with the ISO 1179-1 standard and the ISO 228-1 standard.-H- Note• End-position locking should onlybe operated in conjunction withdouble-acting cylinders withexhaust air flow control in order toensure that the lock is always completelyreleased prior to startingthe drive movement.• No screws with a head or similarmay be used in place of endpositionlocking, as there is a riskthat the function will be impaired ifthey are screwed in too deeply.• The exhaust hole must not beclosed.• Locking can be performed from anystroke position once the drive isbrought mechanically into its endposition.• End-position locking has beendesigned to prevent the loaddropping in case of pressurefailure.• An excessive end-position cushioningsetting (more than 50% closed)canresultinthelockingboltnotengaging reliably, resulting inpremature wear.2010/02 – Subject to change Internet: www.festo.com/catalogue/...31
Page 1 and 2: Standard cylinders DNC, ISO 15552
Page 3 and 4: Standard cylinders DNC, ISO 15552Ke
Page 5 and 6: Standard cylinders DNC, ISO 15552Pr
Page 7 and 8: Standard cylinders DNC, ISO 15552Pe
Page 9 and 10: Standard cylinders DNC, ISO 15552Te
Page 20 and 21: Standard cylinders DNC, ISO 15552Or
Page 22 and 23: Standard cylinders DNC, ISO 15552Or
Page 24 and 25: Standard cylinders DNC-KP, standard
Page 32 and 33: Standard cylinders DNC-EL, standard
Page 38 and 39: Standard cylinders DNC-V1 … V6, s
Page 48 and 49: Standard cylinders DNC, ISO 15552Ac
Page 58 and 59: -V- NewBellows DADBStandard cylinde
Page 60 and 61: -V- NewBellows DADBStandard cylinde
Page 66: Festo North AmericaFesto Regional C

Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?