Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC, ISO 15552AccessoriesFoot mounting HNC/CRHNCMaterial:HNC: Galvanised steelCRHNC: High-alloy steelFree of copper, PTFE and silicone+ =plusstrokelengthDimensions and ordering dataFor ∅ AB AH AO AT AU SA TR US XA XS∅[mm] Basic version KP Basic version KP32 7 32 6.5 4 24 142 187 32 45 144 189 4540 10 36 9 4 28 161 214 36 54 163 216 5350 10 45 9.5 5 32 170 237 45 64 175 242 6263 10 50 12.5 5 32 185 261 50 75 190 266 6380 12 63 15 6 41 210 305 63 93 215 310 81100 14.5 71 17.5 6 41 220 318 75 110 230 328 86125 16.5 90 22 8 45 250 375 90 131 270 395 102For ∅ Basic version High corrosion protectionCRC 1) Weight Part No. Type CRC 1) Weight Part No. Type[mm][g][g]32 2 135 174 369 HNC-32 4 135 176 937 CRHNC-3240 2 180 174 370 HNC-40 4 180 176 938 CRHNC-4050 2 325 174 371 HNC-50 4 325 176 939 CRHNC-5063 2 405 174 372 HNC-63 4 405 176 940 CRHNC-6380 2 820 174 373 HNC-80 4 820 176 941 CRHNC-80100 2 1,000 174 374 HNC-100 4 1,000 176 942 CRHNC-100125 2 1,840 174 375 HNC-125 4 1,840 176 943 CRHNC-1251) Corrosion resistance class 2 as per Festo standard 940 070Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants orlubricating agents.Corrosion resistance class 4 as per Festo standard 940 070Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required.48 Internet: www.festo.com/catalogue/...Subject to change – 2010/02