Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC, ISO 15552AccessoriesMulti-position kit DPNCMaterial:Flange: Wrought aluminium alloyThreaded studs, hex nuts:Galvanised steel+ = plus stroke lengthDimensions and ordering dataFor ∅ F1 ZJ Max.Weight Part No. Typeoverall stroke length[mm] Basic version KP [mm] [g]32 27 120 165 1,000 85 174 418 DPNC-32-H- Note40 27 135 188 1,000 115 174 419 DPNC-40The maximum overall stroke length 50 32 143 210 1,000 210 174 420 DPNC-50must not be exceeded when combin- 63 28 158 234 1,000 360 174 421 DPNC-63ing cylinders and multi-position 80 38 174 269 1,000 620 174 422 DPNC-80kits. 100 38 189 287 1,000 1,190 174 423 DPNC-100125 48 225 350 1,000 1,600 174 424 DPNC-125Connecting two cylinders with identical piston diameter as a 3 or 4-position cylinderA 3 or 4-position cylinder consists oftwo separate cylinders whose pistonrods advance in opposing directions.This means that depending on actuationand stroke division, this type ofcylinder can assume up to fourpositions. In each case the cylinder isdriven precisely against a stop. Notethat when one end of the piston rod isfixed, the cylinder barrel executes themovement. The cylinder’s connectionsmust be flexible.To achieve 3 positionsTwo cylinders with identical strokelength must be connected together.To achieve 4 positionsTwo cylinders with different strokelengths must be connected together.2010/02 – Subject to change Internet: www.festo.com/catalogue/...47