Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC-KP, standard hole pattern, with clamping unitTechnical dataDimensions – Basic versionDownload CAD data www.festo.com1 Socket head screw with femalethread for mountingattachments2 Regulating screw for adjustableend-position cushioning3 Slot for proximity sensorSME/SMT-8+ = plus stroke length∅[mm]AMB∅d11BGD1∅f9D2 E EE H1 J2 J3 KK L2 L332 22 30 16 20 M5 45 Gx 67 6 5.2 M10x1.25 94 4540 24 35 16 24 Gx 54 G¼ 88 8 6 M12x1.25 105 5350 32 40 17 30 Gx 64 G¼ 107 10.4 8.5 M16x1.5 106 6763 32 45 17 38 Gx 75 Gy 123 12.4 10 M16x1.5 121 7680 40 45 17 48 Gx 93 Gy 165.5 12.5 8 M20x1.5 128 95100 40 55 17 48 Gx 110 G½ 174 12 10 M20x1.5 138 98125 54 60 22 65 Gx 134 G½ 207 13 8 M27x2 160 125∅[mm]L5 L7 MM∅PL RT TG VA VD WH ZJ ß1 ß2 ß332 14 3.3 12 15.6 M6 32.5 4 11.5 26 165 10 16 640 16 3.6 16 14 M6 38 4 11.5 30 188 13 18 650 20 5.1 20 14 M8 46.5 4 11 37 210 17 24 863 24 6.6 20 17 M8 56.5 4 11 37 234 17 24 880 31.5 10.5 25 16.4 M10 72 4 12.5 46 269 22 30 6100 31 8 25 18.8 M10 89 4 12 51 287 22 30 6125 42 14 32 18 M12 110 6 27.5 65 350 27 36 8-H- Note: This product conforms with the ISO 1179-1 standard and the ISO 228-1 standard.-H- NoteThe dimensions for the cylinder/valve combination are on page 4226 Internet: www.festo.com/catalogue/...Subject to change – 2010/02