Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC-KP, standard hole pattern, with clamping unitOrdering data – Modular products0O Options0M 0OExtended malethreadFemale thread Special thread Special spannerflatsExtended pistonrodClamping unitCylinder/valvecombination…K2 K3 …K5 K7 …K8 KP V1V2V3V4V5V6– – K3 – – – 100K8 – KP –Ordering tableSize 32 40 50 63 80 100 125 ConditionsCode Extended male thread Pistonrodwithextendedmalethread0O [mm] 1…35 1…70 3 -…K2Female threadPistonrodwithfemalethread(M6) (M8) (M10) (M10) (M12) (M12) (M16) 4 -K3Special threadPistonrodwithspecialthreadM10 M12 M16 M16 M20 M20 M27 -…K5Special spanner flats Pistonrodwithexternalhexagon -K7Extended piston rodExtended piston rod[mm] 1 … 500 -…K80M Clamping unit Attached 5 -KP -KP0O Cylinder/valve combination Single solenoid valve, fitted on right, piston rod retracted when unactuated – 6 -V1Single solenoid valve, fitted on right, piston rod advanced when unactuated – 6 -V2Double solenoid valve, fitted on right – 6 -V3Single solenoid valve, fitted on left, piston rod retracted when unactuated – 6 -V4Single solenoid valve, fitted on left, piston rod advanced when unactuated – 6 -V5Double solenoid valve, fitted on left – 6 -V6Entercode3 K2 Not with K34 K3 With K5: on requestNot with K75 KP Without S2: position of the clamping unit at the bearing cap6 V… Min. stroke: 100 mmTransfer order code– – – – – – KP –2010/02 – Subject to change Internet: www.festo.com/catalogue/...29