Standard cylinders DNC, ISO 15552 - Allied Automation, Inc.

Standard cylinders DNC-KP, standard hole pattern, with clamping unitTechnical dataDimensions – VariantsQ – Square piston rodDownload CAD data www.festo.com-H- NoteClamping unit and variant Q only incombination with S2.S2 – Through piston rod+ = plus stroke length++ = plus 2x stroke length-H- NoteThe thread types at both piston rodends are identical.In combination with variant Q,the left-hand piston rod is round,the right-hand piston rod square.The clamping unit is mounted onthe left-hand, round piston rod.K2 – Extended male piston rod threadK3 – Female piston rod threadK5 – Special piston rod threadK7 – Piston rod with external hexagonK8 – Extended piston rod-H- NoteIn combination with variant S2, thepistonrodisextendedatoneend.The clamping unit is mounted on theside of the piston rod that is not extended.If variant Q is also required,the extension will only be added tothesquarepistonrod.∅ A1 A2 AF AM B1 KF KK T4 WH ZJ ZM ß1[mm]max. max. BasicthreadSpecialthread 1)32 35 500 12 22 10 M6 M10x1.25 M10 2.6 26 165 193 1040 35 500 12 24 12 M8 M12x1.25 M12 3.3 30 188 220 1350 70 500 16 32 16 M10 M16x1.5 M16 4.7 37 210 250 1763 70 500 16 32 16 M10 M16x1.5 M16 4.7 37 234 275 1780 70 500 20 40 20 M12 M20x1.5 M20 6.1 46 269 317 22100 70 500 20 40 20 M12 M20x1.5 M20 6.1 51 287 338 22125 70 500 32 54 – M16 M27x2 M27 8 65 350 416 271) The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery2010/02 – Subject to change Internet: www.festo.com/catalogue/...27