Type 1 1 4 - Horn USA, Inc.

a fwGROOVING (Internal) —Ø.551"TOOLHOLDER typeBU114/B114with through coolantBore Ø from .551 "Depth ofgroove up to .1 57"Width of groove up to .157"Material of shank: Carbide −Giving a good vibration resistance.354for use with insert.433ht max Type U11 4114l 1l 2l 4.20d g6Right hand insert shownPart number l 1 l 2 l 4 d g6 f a h t max Width ofgroove wMini — Ø.551"Inch ToolholderBU11 4.ST05.00* 2.953 .748 1 .57BU11 4.0500.01 3.937 1 .338 1 .97BU11 4.0500.02 4.330 1 .771 1 .97BU11 4.0500.03 5.118 2.520 1.97.500 .354 .543 .460 .157BU11 4.ST06.00* 3.1 50 .748 1 .57BU114.0625.01 3.937 1 .338 1 .97BU114.0625.02 4.330 1 .771 1 .97BU114.0625.03 5.118 2.520 1.97.625 .354 .543 .585 .157up to .1 57Metric Toolholder in mmB114.0012.00 75 1 9 40B114.0012.01 100 34 50B114.0012.02 110 45 50B114.0012.03 130 64 50B114.0016.00 80 1 9 40B114.0016.01 100 34 50B114.0016.02 110 45 50B114.0016.03 130 64 50* Steel Toolholder12 9 13.8 11 416 9 13.8 15 4up to 4.0Dimensions in inch /mmSpare partsToolholder Screw Torx screw driverBU/B1 1 4... 4.1 2T1 5E T1 5NoteToolholders can be used with right and lefthandinserts.Further shank sizes upon request.Toolholders with damaged seating can be repairedby HORN USA.B30In the UNITED STATES call us toll free