Operating and Installation Instructions Display device KERN KFS-T

More documents

Recommendations

Info

7.7 TotalizationAdding-up during weight display:Weight display:Item weight display:Item quantity display:Currently placed weightSelected item weightCurrently placed quantity of itemsCurrently placed weightSelected item weightCurrently placed quantity of itemsAdding-up during item display:Pressand the display changes to item display.Weight display:Item weight display:Item quantity display:Currently placed item quantityCurrently placed item quantity + total of addeddisplay valuesTotal of added-up display valuesCurrently placed quantity of itemsPreview: currently placed quantity ofitems + current total number of itemsCurrent total number of items22 KFS-T-BA_IA-e-1213
7.7.1 Manual totalizingWith this function the individual weighing values are added into the summationmemory by pressingand edited, when an optional printer is connected.Menu setting:„F11 AC“ „5 AC 1“, see chap. 8„F7 UA“ „4 UA 5“ see chap. 8 Calculate the average item weight (see chap. 7.6.1) or enter it manually (seechap. 7.6.2). Place weighing goods A.Currently placed weightSelected item weightCurrently placed quantity of items Wait for stability display, then press . The displayed value (e.g. 50 pieces) willbe added to the summation memory and printed if an optional printer isconnected.****************GS:NO: 1UW:PCS:5.0000kg100g50pcs**************** Remove the weighed good. More weighed goods can only be added when thedisplay ≤ zero.KFS-T-BA_IA-e-1213 23
Page 4 and 5: 1 Technical dataKERNDisplayDivision
Page 6 and 7: 2.1 Overview of displayWeight displ
Page 8 and 9: 2.2 Keyboard overviewKeyFunction Tu
Page 10 and 11: 3.4 Monitoring of Test ResourcesIn
Page 12 and 13: 6.3 Unpacking/installationCarefully
Page 14 and 15: Call up menu: Switch-on balance and
Page 16 and 17: 6.6 LinearizationLinearity shows th
Page 18 and 19: 7 Operation7.1 Start-up Press and t
Page 20 and 21: 7.6.1 Determination of the average
Page 25 and 26: Display and output sum „Total“:
Page 27 and 28: 7.7.2 Automatic adding-upWith this
Page 30 and 31: Activate function For menu setting
Page 32 and 33: 7.8.1 Tolerance check for target qu
Page 34 and 35: 7.8.2 Tolerance check for target we
Page 36 and 37: Start tolerance check Place load an
Page 38 and 39: Change settingsConfirm selected men
Page 40 and 41: F9 PAParity42 Pr0* No parity bit44
Page 42 and 43: 9.1 Printer modePrintout example (K
Page 44 and 45: 11 Error messages, troubleshooting
Page 46 and 47: 12.3 How to connect the platform Di
Page 48 and 49: Change settingsConfirm selected men
Page 50 and 51: Dual range balanceConfirm with, the
Page 52: 13 Declaration of conformityEG-Konf

Operating and Installation Instructions Display device KERN KFS-T

Create successful ePaper yourself

Delete template?

Save as template?