Operating and Installation Instructions Display device KERN KFS-T

More documents

Recommendations

Info

7.8.2 Tolerance check for target weight Activate menu setting „F0 sel / SEL 1“, see chap.7.8 „Activate function“.Set limit values Pressto display the lower limit including current setting.Delete withif necessary. Use the numeric keys to enter the weight for the lower limit value (such as 3 kg)and confirm by pressing .The upper limit for the target weight including current setting will be displayed.Delete withif necessary.34 KFS-T-BA_IA-e-1213
Use the numeric keys to enter the upper limit (such as 4 kg) and confirm by .KFS-T-BA_IA-e-1213 35
Page 4 and 5: 1 Technical dataKERNDisplayDivision
Page 6 and 7: 2.1 Overview of displayWeight displ
Page 8 and 9: 2.2 Keyboard overviewKeyFunction Tu
Page 10 and 11: 3.4 Monitoring of Test ResourcesIn
Page 12 and 13: 6.3 Unpacking/installationCarefully
Page 14 and 15: Call up menu: Switch-on balance and
Page 16 and 17: 6.6 LinearizationLinearity shows th
Page 18 and 19: 7 Operation7.1 Start-up Press and t
Page 20 and 21: 7.6.1 Determination of the average
Page 22 and 23: 7.7 TotalizationAdding-up during we
Page 25 and 26: Display and output sum „Total“:
Page 27 and 28: 7.7.2 Automatic adding-upWith this
Page 30 and 31: Activate function For menu setting
Page 32 and 33: 7.8.1 Tolerance check for target qu
Page 36 and 37: Start tolerance check Place load an
Page 38 and 39: Change settingsConfirm selected men
Page 40 and 41: F9 PAParity42 Pr0* No parity bit44
Page 42 and 43: 9.1 Printer modePrintout example (K
Page 44 and 45: 11 Error messages, troubleshooting
Page 46 and 47: 12.3 How to connect the platform Di
Page 48 and 49: Change settingsConfirm selected men
Page 50 and 51: Dual range balanceConfirm with, the
Page 52: 13 Declaration of conformityEG-Konf

Operating and Installation Instructions Display device KERN KFS-T

Create successful ePaper yourself

Delete template?

Save as template?