Operating and Installation Instructions Display device KERN KFS-T

More documents

Recommendations

Info

Delete weighing data: Pressto display the total weight, the number of weighing procedures andthe total quantity for 2 sec. During this display press .26 KFS-T-BA_IA-e-1213
7.7.2 Automatic adding-upWith this function the individual weighing values are automatically added into thesummation memory when the balance is unloaded and edited, when an optionalprinter is connected.Menu setting:„F11 AC“ „5 AC 0“, see chap. 8„F7 UA“ „4 UA 5“ see chap. 8Adding-up: Calculate the average item weight (see chap.. 7.6.1) or enter it manually(see chap.. 7.6.2). Place weighing goods A.After the standstill control sounds a signal tone, the weighing value will beadded into the summation memory. Remove the weighed good. When an optional printer is connected, datawill be edited.****************GS:NO: 1UW:PCS:5.0000kg100g50pcs****************More weighed goods can only be added when the display ≤ zero. Place goods to be weighed B.After the standstill control sounds a signal tone, the weighing value will beadded into the summation memory. Remove the weighed good.The total weight, the number of weighings as well as the total number ofpieces will shortly appear (Indicator [] next to TOTAL).When an optional printer is connected, data will be edited.****************GS:NO: 2UW:PCS:2.0000kg100g20pcs****************KFS-T-BA_IA-e-1213 27
Page 4 and 5: 1 Technical dataKERNDisplayDivision
Page 6 and 7: 2.1 Overview of displayWeight displ
Page 8 and 9: 2.2 Keyboard overviewKeyFunction Tu
Page 10 and 11: 3.4 Monitoring of Test ResourcesIn
Page 12 and 13: 6.3 Unpacking/installationCarefully
Page 14 and 15: Call up menu: Switch-on balance and
Page 16 and 17: 6.6 LinearizationLinearity shows th
Page 18 and 19: 7 Operation7.1 Start-up Press and t
Page 20 and 21: 7.6.1 Determination of the average
Page 22 and 23: 7.7 TotalizationAdding-up during we
Page 25: Display and output sum „Total“:
Page 30 and 31: Activate function For menu setting
Page 32 and 33: 7.8.1 Tolerance check for target qu
Page 34 and 35: 7.8.2 Tolerance check for target we
Page 36 and 37: Start tolerance check Place load an
Page 38 and 39: Change settingsConfirm selected men
Page 40 and 41: F9 PAParity42 Pr0* No parity bit44
Page 42 and 43: 9.1 Printer modePrintout example (K
Page 44 and 45: 11 Error messages, troubleshooting
Page 46 and 47: 12.3 How to connect the platform Di
Page 48 and 49: Change settingsConfirm selected men
Page 50 and 51: Dual range balanceConfirm with, the
Page 52: 13 Declaration of conformityEG-Konf

Operating and Installation Instructions Display device KERN KFS-T

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?