Operating and Installation Instructions Display device KERN KFS-T

More documents

Recommendations

Info

9.1 Printer modePrintout example (KERN YKB-01N):ST, GS1.000kgSymbols:STUSNTGSNOUWPCSWTStable valueInstable valueNet weightGross weightNumber of weighing when totalizingAverage piece weightQuantityTotal weight „Total“9.2 Remote control instructionsCommand FunctionPrintout exampleSWTZPStable weighing value for the weight issent via the RS232 interfaceWeighing value for the weight (stable orunstable) is sent via the RS232 interfaceNo data are sent, the balance carries outthe tare function.No data are sent, the zero-displayappears.Quantity will be sent via the RS232-interfaceST,NT 0.0000kgST,GS 1.9990kg--ST,GS 10pcs42 KFS-T-BA_IA-e-1213
10 Service, maintenance, disposal10.1 CleanBefore cleaning, disconnect the appliance from the operating voltage.Please do not use aggressive cleaning agents (solvents or similar agents), but acloth dampened with mild soap suds. Take care that the device is not penetrated byfluids and polish it with a dry soft cloth.Loose residue sample/powder can be removed carefully with a brush or manualvacuum cleaner.Spilled weighing goods must be removed immediately.10.2 Service, maintenanceThe appliance may only be opened by trained service technicians who are authorizedby KERN.Before opening, disconnect from power supply.10.3 DisposalDisposal of packaging and appliance must be carried out by operator according tovalid national or regional law of the location where the appliance is used.Should other error messages occur, switch balance off and then on again. If the errormessage remains inform manufacturer.KFS-T-BA_IA-e-1213 43
Page 4 and 5: 1 Technical dataKERNDisplayDivision
Page 6 and 7: 2.1 Overview of displayWeight displ
Page 8 and 9: 2.2 Keyboard overviewKeyFunction Tu
Page 10 and 11: 3.4 Monitoring of Test ResourcesIn
Page 12 and 13: 6.3 Unpacking/installationCarefully
Page 14 and 15: Call up menu: Switch-on balance and
Page 16 and 17: 6.6 LinearizationLinearity shows th
Page 18 and 19: 7 Operation7.1 Start-up Press and t
Page 20 and 21: 7.6.1 Determination of the average
Page 22 and 23: 7.7 TotalizationAdding-up during we
Page 25 and 26: Display and output sum „Total“:
Page 27 and 28: 7.7.2 Automatic adding-upWith this
Page 30 and 31: Activate function For menu setting
Page 32 and 33: 7.8.1 Tolerance check for target qu
Page 34 and 35: 7.8.2 Tolerance check for target we
Page 36 and 37: Start tolerance check Place load an
Page 38 and 39: Change settingsConfirm selected men
Page 40 and 41: F9 PAParity42 Pr0* No parity bit44
Page 44 and 45: 11 Error messages, troubleshooting
Page 46 and 47: 12.3 How to connect the platform Di
Page 48 and 49: Change settingsConfirm selected men
Page 50 and 51: Dual range balanceConfirm with, the
Page 52: 13 Declaration of conformityEG-Konf

Operating and Installation Instructions Display device KERN KFS-T

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?