Fire-Lite Alarms MS-9600 Addressable Fire Control Panel

Product DescriptionControls and Indicators1.4 Controls and IndicatorsLCD DisplayThe FACP uses an 80-character (4lines X 20 characters) high viewingangle LCD display. The displayincludes a long life LED backlightthat remains illuminated. If ACpower is lost and the system is not inalarm, the LED backlight will turn off to conserve batteries.LED IndicatorsLED indicators are provided to annunciate the following conditions:• AC Power (green)• Fire Alarm (red)• Supervisory (yellow)• Trouble (yellow)• Maintenance/presignal (yellow)• Alarm Silenced signals (yellow)• Disabled (yellow)• Battery fault (yellow)• Ground fault (yellow)Key PanelMounted on the main circuit board, the key panel includes a window for the LCDdisplay and LED indicators as listed above. The key panel, which is visible with thecabinet door closed, has 25 keys, including a 16 key alpha-numeric pad similar to atelephone keypad.Function keys:• Acknowledge/Step• Alarm Silence• Drill• Reset (lamp test)1Service/program keys:• Keys labeled 1 to 94• * key• # key*• 0 (recall) key• 1st Event key• Clear key• Escape key• Mode key• Four cursor keys (up, down, left and right)• Enter keyFIRE-LITE ALARMS INCSYSTEM ALL NORMAL10:00A 010101Local Piezo SounderA piezo sounder provides separate and distinct pulse rates for alarm, trouble andsupervisory conditions.250ABC36#DEFGHI JKL MNOPRS TUV WXYQZ -/.1 st EVENTCLR7 8 9 ESCRECALLMODEAC POWERFIRE ALARMSUPERVISORYTROUBLEENTERMAINTENANCEALARMSILENCEDACK/STEPDISABLEDBATTERYGROUNDALARMSILENCEDRILLHOLD 2 SECRESETFigure 1.2 Membrane/Display Panel9600kypd.cdr16 MS-9600 PN 51335:D 11/06/01