Megatouch FORCE Touchscreen Replacement

More documents

Recommendations

Info

COPYRIGHT © 2004 MERIT INDUSTRIES, INC.CABLECLAMPS(2 PLACES)SCREWSSECURINGBEZEL TOWOODENFRAME(10 PLACES)GROUNDSCREWMONITORPOWERCONNECTORMONITORCONTROLBOARDCONNECTORVGAMONITORCONNECTORTOUCHSCREENCONTROLLERFIGURE 12 - FORCE FUSION - UNDERSIDE OF BEZELMOLEXCONNECTORGROUNDSCREWFIGURE 13 - FORCE FUSION - CLOSEUP OF CPU SECTIONPM0331-04 MEGATOUCH FORCE TOUCHSCREEN REPLACEMENT 14
COPYRIGHT © 2004 MERIT INDUSTRIES, INC.CABLECLAMPSSCREWSFASTENINGLCD MONITORTO BEZEL(10 PLACES)FIGURE 14 - FORCE FUSION - UNDER SIDE OF MONITOR9. Place the new LCD monitor in the bezel(make sure it is not upside-down), liningup the screw holes on the face of themounting frame with the larger, drilledholes on the plastic mounting pieces(see Figure 15), and fasten it with the10 screws. Also replace the cableclamps in the appropriate screw holes(See Figure 14).10. Carefully replace the plastic bezelassembly in the game, making sure thecoin cup protrudes into the lowercutout and no wires are pinched, thensecure it to the wooden frame withthe 10 screws (see Figure 12).11. Connect the touchscreen controllercable in the back of the controller andsecure the controller in the game withthe existing hardware. Then connectthe Molex connector (orange and graywires) to the main power harness andattach the ground screw. Replace thecables in the clamps as before. SeeFigure 13.12. Reconnect the VGA monitor connectorand ground screw (do not overtighten),the monitor control boardconnector, and the monitor powerconnector (see Figure 12) and replacethe cables in the 2 clamps attached tothe monitor.13. Plug in and turn on the game.14. When the game is finished booting,press the CALIBRATE button.15. Close and lock the bezel, then calibratethe touchscreen.FORCE UPRIGHT (NON-FUSION)GAMESTouchscreen Removal1. Turn off and unplug the game.2. Upright with coin door: Remove thebezel by removing the 2 wing nuts in-15 MEGATOUCH FORCE TOUCHSCREEN REPLACEMENT PM0331-04
Page 5 and 6: COPYRIGHT © 2004 MERIT INDUSTRIES,
Page 15: COPYRIGHT © 2004 MERIT INDUSTRIES,
Page 29 and 30: NOTES:_____________________________

Megatouch FORCE Touchscreen Replacement

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?