Proficy Machine Edition Getting Started, GFK-1868H

2Proficy Machine EditionMachine Edition Projects4. Within your Machine Edition project, specify the IP address or computer name of the remote NT target in theComputer Address target property. This enables Machine Edition to locate and connect to the NT target computer.Type the IP address or the computername of the remote NT target to whichyou want to download your project files.Want to know more?In the Help Index, look up “Preparing Windows NT targets fordownloading”.Preparing a Windows CE target for downloadingThe following steps need to be completed on the Windows CE, CE II, CE IIx, andQuickPanel View/Control targets before you can download a project to it. If youare not physically connected to the CE unit but want to test your project, you candownload the project to your local computer by setting the Use Simulator targetproperty to True. Note that you cannot download a project that contains a logiccomponent to a View-only target, because they do not support logic.1. Physically connect the View-only target, Windows CE unit to the Ethernet network. This step may require the help ofa network administrator.2. Within your Machine Edition project, specify the IP address of the Windows CE unit in the Computer Address targetproperty.To find the IP address of a Windows CE unit, double-tap the System Informationicon located on the desktop of the CE unit.By default, the CE unit uses a DHCP (Dynamic Host Configuration Protocol) IPaddress. This means that the IP address is dynamically assigned by the Ethernet32 Machine Edition 5.50GFK-1868H