Proficy Machine Edition Getting Started, GFK-1868H

1WelcomeSystem RequirementsSYSTEM REQUIREMENTSTo use Machine Edition and its tools, you require the following:Development Environment■Windows ® NT Professional version 4.0 with service pack 6a or later-or-Windows 2000 Professional (service pack 3 recommended)-or-Windows XP Professional (service pack 1 or later recommended)Note: Windows XP Tablet PC Edition is not supported.■■■■■Internet Explorer version 5.5 Service Pack 2 Q810847 or later, or InternetExplorer version 6.0 Service Pack 1 or later.Requirements for processor speed and memory are as follows:Minimum: 1 GHz Pentium-based processor with 256 MB RAMRecommended: 2 GHz Pentium-based processor with 512 RAMNote: For projects with more than 75,000 variables or variable elements, atleast 1 GB or RAM is strongly recommended.TCP/IP network protocol-based workstation.150-750 MB hard disk space, depending on the installed products.200 MB hard disk space for sample projects (optional).■Additional hard disk space for projects and temporary files.Note: Windows 98, NT, ME, 2000, and XP workstations require the Microsoft .NETFramework v1.1. If this is not yet installed, you will need approximately 150 MBadditional hard disk space when installing Machine Edition. The .NET Frameworkis automatically included with Machine Edition, so you do not need to install itseparately.Warning: After installation of Machine Edition and the .NET Framework iscomplete, do not attempt to install an older or beta version of the .NET Framework.This will cause the newest version of the .NET Framework to fail.2 Machine Edition 5.50GFK-1868H