MS Thesis R. Hager - Hawaii National Marine Renewable Energy ...

4.2 AQWA Modeling ProcedureThe user builds a project by adding and combining Analysis Systems in the ANSYSWorkbench, as seen in Figure4.1. The user selects an Analysis System template from theFigure 4. 1 ANSYS WorkbenchToolbox on the right-hand side of the Workbench by either dragging the system to theProject Schematic or double-clicking on the Analysis System. A green box indicates possibledrop targets, which becomes red when the mouse is over a possible drop target, as seen inFigure 4.1. In this thesis the Hydrodynamic Diffraction (AQWA) system is used.The system is a block of cells, as seen in Figure 4.2. The output from upstream cells is inputdata to downstream cells. Data are also shared from left to right. The user can either doubleclickor right-mouse click a cell to modify it. Double-clicking a cell will initiate the defaultaction. A right-mouse click will generate a context menu, as seen in Figure 4.2.56