Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-330891.1 Introduction1. PRODUCT OVERVIEW1.1 IntroductionThank you for choosing the TOSHIBA B-EX4T1 series bar code printer.This Owner’s Manual contains from general set-up through how toconfirm the printer operation using a test print, and should be readcarefully to help gain maximum performance and life from your printer.For most queries please refer to this manual and keep it safe for futurereference. Please contact your TOSHIBA TEC representative for furtherinformation concerning this manual.1.2 FeaturesThis printer has the following features:• The print head block can be opened providing smooth loading ofmedia and ribbon.• Various kinds of media can be used as the media sensors can bemoved from the centre to the left edge of the media.• Web functions such as remote maintenance and other advancednetwork features are available.• Superior hardware, including the specially developed 8 dots/mm (203dots/inch) or 12 dots/mm (305 dots/inch) thermal print head whichwill allow very clear print at a printing speed of 3 inches/sec., 6inches/sec., 10 inches/sec., 12 inches/sec. or 14 inches/sec. with 8dots/mm thermal head or 3 inches/sec., 5 inches/sec., 8 inches/sec., 10inches/sec., 12 inches/sec. or 14 inches/sec. with 12 dots/mm thermalhead.• Besides the optional Cutter Module, there is also an optional Peel offModule, Ribbon Saving Module, RS-232C I/F card, Centronics I/Fcard, Expansion I/O Card, Wireless LAN I/F card, the RTC/USB hostI/F card, RFID module, and Narrow width platen kit.1.3 UnpackingUnpack the printer as per the Unpacking Instructions supplied with theprinter.NOTES:1. Check for damage orscratches on the printer.However, please note thatTOSHIBA TEC shall have noliability for any damage ofany kind sustained duringtransportation of the product.2. Keep the cartons and padsfor future transportation ofthe printer.E1- 1