Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

More documents

Recommendations

Info

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-330891.6 Options1.6 OptionsOption Name Type DescriptionDisc cutter module B-EX204-QM-R Disc cutterEach time media is cut, the media feed is stopped.Rotary cutter module B-EX204-R-QM-R Rotary cutterOn-the-fly (non-stop) cut operation is enabled.Strip module B-EX904-H-QM-R This allows use of on-demand (peel-off) operation orto take-up labels and backing paper together whenusing the rewind guide plate. To purchase the stripmodule, please inquire at your local distributor.Ribbon saving module B-EX904-R-QM-R This module moves the print head up and down byusing a solenoid to minimize ribbon usage as far aspossible.Narrow width platen B-EX904-PK-QM-R This platen kit is for using narrow and thin paper.RFID module mountkitB-EX700-RFID-H1-QM-R This kit is to mount Tagsys HF RFID module andantenna.RFID moduleB-EX700-RFID-U2-EU-RB-EX700-RFID-U2-US-RB-EX700-RFID-U2-CN-RInstalling this module enables read and write ofUHF RFID tags.EU for EuropeUS for USA/CanadaCN for China203-dpi print head B-EX704-TPHE2-QM-R This print head enables a conversion of a 305dpiprint head of the B-EX4T1-TS12 model into 203dpiprint head.305-dpi print head B-EX704-TPHE3-QM-R This print head enables a conversion of a 203dpiprint head of the B-EX4T1-GS12 model into 305dpiprint head.RTC & USB hostinterface cardB-EX700-RTC-QM-RThis card holds the current time: year, month, day,hour, minute, second and provides a USB hostinterface.Installing this card in the printer allows connectionto an external device with the exclusive interface.Expansion I/O interface B-EX700-IO-QM-RcardParallel interface card B-EX700-CEN-QM-R Installing this card provides a Centronics interfaceport.Serial interface card B-EX700-RS-QM-R Installing this card provides an RS-232C interfaceport.Wireless LAN interfacecardB-EX700-WLAN-QM-RInstalling this card allows a communication bywireless LAN.NOTE:To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative orTOSHIBA TEC Head Quarters.E1- 5
2. PRINTER SETUP ENGLISH VERSION EO1-330892. PRINTER SETUP2. PRINTER SETUPThis section outlines the procedures to setup your printer prior to its operation. The section includes precautions,loading media and ribbon, connecting cables, setting the operating environment of the printer, and performing anonline print test.Setup FlowInstallationConnecting the power cordProcedureAfter referring to the Safety Precautions in thismanual, install the printer on a safe and stablelocation.Connect a power cord to the power inlet of theprinter, then, to an AC outlet.Reference2.1 Installation2.2 Connecting the PowerCordLoading the mediaLoad a label stock or tag stock.2.3 Loading the MediaMedia sensor positionalignmentAdjust the position of feed gap sensor or blackmark sensor according to the media to be used.2.3.1 Loading the MediaLoading the ribbonIn case of thermal transfer printing, load theribbon.2.3.2 Loading the RibbonConnecting to a host computerConnect the printer to a host computer or anetwork.2.4 Connecting the Cables toYour PrinterTurning the power ONTurn on the printer power.2.5 Turning the PrinterON/OFFPrinter settingSet the printer parameters in the system mode.2.6 Printer SettingInstalling the printer driverPrint testIf necessary, install the printer driver in yourhost computer.Make a print test in your operatingenvironment and check the print result.2.7 Installing the PrinterDrivers2.8 Print TestPosition and Print Tone FineadjustmentAutomatic threshold settingManual threshold settingIf necessary, fine adjust the print start position,cut/strip position, print tone, etc.If the print start position cannot be detectedproperly when pre-printed label is used, set thethreshold automatically.If the print start position cannot be detectedproperly even an automatic threshold setting isperformed, manually set the threshold.2.9 Position and Print ToneFine Adjustment2.10 Threshold Setting2.10 Threshold SettingE2- 1
Page 3 and 4: TOSHIBA Barcode PrinterB-EX4T1 SERI
Page 7 and 8: Safety SummaryENGLISH VERSIONDiscon
Page 10 and 11: 1. PRODUCT OVERVIEW ENGLISH VERSION
Page 12 and 13: 1. PRODUCT OVERVIEW ENGLISH VERSION
Page 16 and 17: 2. PRINTER SETUP ENGLISH VERSION EO
Page 30: 2. PRINTER SETUP ENGLISH VERSION EO
Page 65 and 66:
2. PRINTER SETUP ENGLISH VERSION EO
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
2.PRINTER SETUPENGLISH VERSION EO1-
Page 83 and 84:
2.PRINTER SETUPENGLISH VERSION EO1-
Page 85 and 86:
3. ON LINE MODE ENGLISH VERSION EO1
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
4. MAINTENANCE ENGLISH VERSION EO1-
Page 93 and 94:
5. TROUBLESHOOTING ENGLISH VERSION
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
6. PRINTER SPECIFICATIONS ENGLISH V
Page 101 and 102:
7. SUPPLY SPECIFICATIONS ENGLISH VE
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
APPENDIX 1 MESSAGES AND LEDSENGLISH
Page 111 and 112:
APPENDIX 2 INTERFACEENGLISH VERSION
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
APPENDIX 3 PRINT SAMPLESENGLISH VER
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
APPENDIX 4 GLOSSARIESENGLISH VERSIO
show all

Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?