Toshiba B-EX4T1 Owners Manual - The Barcode Warehouse

2. PRINTER SETUP ENGLISH VERSION EO1-330892.6 Printer Setting2.6 Printer Setting Depending on the settings of your host computer or an interface to beused, it may be necessary to change the printer parameter settings.Follow the procedures described below to change the printer parametersettings to correspond to your environment.NOTE:Incorrect settings can cause the printer to function erroneously. If you haveany problems with the parameter settings, please contact your nearestTOSHIBA TEC service representative.For the settings this manual does not cover, please contact your nearestTOSHIBA TEC service representative, or refer to the B-EX4T Series KeyOperation Specification.Power OFFPower ONONLINE Mode[PAUSE]PAUSE stateHold down [RESTART]Hold down [MODE]User System ModeTurn on the power while holdingdown [FEED] & [PAUSE] or[MODE].System Mode• Reset• Parameter setting (⇒Section 2.6.2)• Fine adjustment (⇒Section 2.9)• LAN/WLAN (⇒Section 2.6.3)• BASIC (⇒Section 2.6.4)• Z-MODE (⇒Section 2.6.5)• Auto calibration (⇒Section 2.6.6)• Dump mode (⇒Section 2.6.7)• Log (⇒Section 2.6.8)• Self diagnosis• Parameter setting• Fine adjustment• Test print (⇒Section 2.8)• Sensor adjustment• RAM clear• Interface setting (⇒Section 2.6.10)• BASIC mode• RFID setting• Real Time Clock (⇒Section 2.6.11)• Z-MODE• USB memory• ResetE2-14