DIGI KEYER II - microHAM

microHAM © 2010 All rights reservedAPPENDIX C – TrackingNOTE: Tracking is experimental code for linking the transceiver frequency to a trackingreceiver begun in Router 7.5.0 . Mode linking and bidirectional frequency tracking are notcurrently supported.microHAM will be expanding features and adding support for additional radios in the future.The initial version has been tested with Perseus SDR only.PERSEUSRadio: PERSEUSPort: COM10Source QRG: Defines which frequency will be used for SDR trackingOffset: Specifies frequency offset from tracking frequency send to SDR for tracking.NOTE: COM10 is the default COM port for PERSEUS can only be changed in the Windowsregistry (refer to the Perseus manual). Make sure that the COM10 is not used by any otherdevice in PC. Then create virtual COM10 in Router and do not use this COM port number forany purpose other than tracking.46