MK-MK2 Rotary clamp cylinder.. - SMC Pneumatics (Ireland)

Reed Switch: Rail Mounting StyleD-A72HGrommetElectrical entry direction: In-lineAuto Switch Internal CircuitD-A72HReed switchLED diodeResistorZenerdiodeBrownBlueContact protection boxCD-P11ChokecoilSurgeabsorberOUTBrownOUTBlueAuto Switch SpecificationsPLC: Programmable Logic ControllerD-A72H (With indicator light)Auto switch modelD-A72HApplicable loadRelay, PLCLoad voltage200 VACMaximum load current and Load current range Note 3)5 to 10 mAContact protection circuitNoneInternal resistance2.4 V or lessIndicator lightRed LED illuminates when turned ON.StandardsConforming to CE standards Lead wires — Oilproof heavy-duty vinyl cable: 0.2 mm 2 x 2 cores (Brown, Blue), 0.5 mNote 1) Refer to page 27 for reed switch common specifications.Note 2) Refer to page 27 for lead wire lengths.Note 3) Under 5 mA, the strength of the indicator light is poor. In some cases, visibility of the indicatorlight is not be possible if the output signal is less than 2.5 mA. However, there is noproblem in terms of contact output, if an output signal exceeds 1 mA or more.WeightUnit: gNote) For D-A72H, be sure to use the contactprotection box. (For details about thecontact protection box, refer to page 27.)Auto switch modelLead wire length(m)0.535D-A72H1047—DimensionsD-A7H/A80HUnit: mm222ø3.48.5 Most sensitive position8ø3.2157 4SMC6.2 3.310.2Indicator lightD-A80H type comeswithout indicator light.31